MOULD DESIGN · DFM · MOLD FLOW

Your mould should not be the reason the launch slips.

We help hardware teams find the expensive problems before the steel is cut — then design a tool that machines, fits and runs the way it was drawn.

20 years in tooling · NDA-protected · 7–15 day design turnaround
MOULD STACK / SECTION CAVITY CORE SPRUE
SERVICES

Pick the problem you need solved.

Fixed scope, fixed price, clear deliverables. Start with a DFM audit or send a full mould design brief.

01 / PRE-TOOLING

DFM Audit

Find the five changes that save a tool revision — before the steel is ordered.

  • Wall, draft and radii review
  • Undercuts, shut-offs and ejection
  • Gate, runner and cooling check
  • 2-page report + 30-min call
From $349 · 3–5 days
02 / TOOL DESIGN

Injection Mould Design

A complete 3D and 2D tool design that your bench can actually machine and assemble.

  • Parting, feed, cooling, ejection
  • 3D + 2D + BOM + EDM list
  • Two structured review rounds
  • Try-out support
From $1,450 · 7–15 days
03 / SIMULATION

Moldflow Analysis

See weld lines, air traps, sink and warpage while they are still cheap to fix.

  • Fill, pack, cool and warp
  • Gate and runner optimisation
  • Clear report with actions
  • Review call with the designer
From $550 · 3–7 days
REPRESENTATIVE WORK

Problems we are usually called in to fix.

Client names and CAD are confidential. These are representative project patterns, not client disclosures.

CONSUMER HOUSING

Sink marks removed before tooling

A 4 mm boss wall on a 2.5 mm nominal wall was cratered and the gate was moved. The tool started on the first trial.

Result: one tool revision avoided
AUTOMOTIVE BRACKET

Warpage traced to cooling

Moldflow showed an unbalanced circuit on the thick side. The circuit was split and the part came into tolerance.

Result: trial-and-error cycles cut
MEDICAL ENCLOSURE

11 days from STEP to tool release

A full 3D/2D package with DFM, BOM and EDM data, reviewed in two Loom sessions.

Result: tool released on schedule
Cases are anonymised. No client CAD, names or dimensions are published without written permission.
PROCESS

Four steps. No black box.

You always know what is being checked, what it costs and when it will be delivered.

Send the part

STEP/Parasolid, 2D, material, cavitation, machine and cosmetic requirements.

DFM + fixed quote

We return a short DFM note and a fixed price within 72 hours.

Design + weekly review

Loom walkthroughs every week; you see the tool as it develops.

Release + try-out

3D, 2D, BOM, EDM data and support during the first trial.

Send the part. We will tell you what we would change.

Tell us what you are building and where the tooling risk is. Add a STEP link if you have one — we reply within one business day.

hello@yourdomain.com

NDA available on request. We do not share client data.

Book a 30-min call

We use your details only to reply. No newsletter. NDA available on request.
Thank you — your enquiry is on its way.
We will reply within one business day. If it is urgent, email hello@yourdomain.com.
Prefer to talk? Book a 30-min call →